| Issue |
E3S Web Conf.
Volume 383, 2023
International Scientific Conference Transport Technologies in the 21st Century (TT21C-2023) “Actual Problems of Decarbonization of Transport and Power Engineering: Ways of Their Innovative Solution”
|
|
|---|---|---|
| Article Number | 04036 | |
| Number of page(s) | 6 | |
| Section | Mechanical Engineering and New Energy Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202338304036 | |
| Published online | 24 April 2023 | |
Gas pyrolysis resin as a plasticizer for composite elastomer materials
1
Tashkent State Transport University, pass. 1st Temiryulchilar, 1, 100167 Tashkent, Uzbekistan
2
Tashkent State Technical University named after Islam Karimov, Street University, 2A, 100095 Tashkent, Uzbekistan
3
Tashkent State Pedagogical Institute, Bunyodkor avenue, 27, 100070 Tashkent, Uzbekistan
* Corresponding author: barnoshka4675@gmail.com
The aim of the study is to study the effect of gas pyrolysis resin on the properties of elastomeric composite materials. It has been established that in the presence of it in the thiuram vulcanizing system, the relative rate of vulcanization of styrene-butadiene rubber increases, the time to reach the optimum vulcanization decreases, but the degree of vulcanization decreases, proportional to the maximum torque, and when using a sulfur vulcanizing system, it activates the vulcanization process, which is facilitated by the presence in its composition of active functional groups (-OH, -COOH, etc.). It is shown that the tensile strength and relative elongation of the vulcanizates increase, while the elasticity remains at an average level.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.