| Issue |
E3S Web Conf.
Volume 383, 2023
International Scientific Conference Transport Technologies in the 21st Century (TT21C-2023) “Actual Problems of Decarbonization of Transport and Power Engineering: Ways of Their Innovative Solution”
|
|
|---|---|---|
| Article Number | 04037 | |
| Number of page(s) | 9 | |
| Section | Mechanical Engineering and New Energy Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202338304037 | |
| Published online | 24 April 2023 | |
Theoretical analysis of the vibration inducing processes of the “workpiece-mandrel” assemblies during gear-tooth milling
Rostov State Transport University, 2, Rostovskogo Strelkovogo Polka Narodnogo Opolcheniya Sq., Rostov-on-Don, 344038, Russia
* Corresponding author: fta09@bk.ru
The theoretical study of the acoustic characteristics of the “workpiece-mandrel” technological system during gear-teeth milling has shown that for calculating the sound pressure levels, it is necessary to determine the vibration velocities of the workpieces and mandrels at their natural vibration frequencies. The paper presents the results of the theoretical studies of the vibration velocities of the processed gear wheels and mandrels during gear-tooth milling by the rolling and copying method.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.