| Issue |
E3S Web of Conf.
Volume 389, 2023
Ural Environmental Science Forum “Sustainable Development of Industrial Region” (UESF-2023)
|
|
|---|---|---|
| Article Number | 01009 | |
| Number of page(s) | 11 | |
| Section | Materials Science Innovations, Green Chemistry and Emission Reduction | |
| DOI | https://doi.org/10.1051/e3sconf/202338901009 | |
| Published online | 31 May 2023 | |
CAM model parameterisation methodology and its further unification in Siemens NX environment
Moscow Aviation Institute 4, Volokolamskoye shosse, 125993, Moscow, Russia
* Corresponding author: wc21@inbox.ru
The paper describes the methodology of mathematical CAD model parameterisation for the subsequent development of the control program (CP) in Siemens NX 2206, which allows in the process of changing the parametric CAD model to adapt not only the 3D model, but also to rebuild the control program, thereby significantly reducing the time for CP development. The application of methods of parametrisation of models in the article is shown in an example of simulators of blades of 3 stages. As a result, a parametric CAD model of the blade simulator, tooling for the product installation on the machine tool, for 3-axis CNC milling machining, automatically changing for each stage of the simulator were developed. A simulator manufacturing process based on the parametric model was developed and successfully implemented. The report formulated the basic provisions and rules for the design of single-type models for the subsequent development of universal control programmes for CNC machines.
Key words: Mechanical engineering / Siemens NX / compressor blade simulators / gas turbine engine / part family / milling / CAD systems
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.