| Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
|---|---|---|
| Article Number | 04018 | |
| Number of page(s) | 11 | |
| Section | Green Chemistry and Sustainable Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202341304018 | |
| Published online | 11 August 2023 | |
Development of technological process of metal machining from stamping on 5-axis CNC milling machine
Moscow Aviation Institute (National Research University), 125080 Moscow, Russia
* Corresponding author: gxtl@mail.ru
The technological process of compressor working blade production from stamping with minimum allowance for machining of the working part, on 5-axis CNC machine aimed at reducing the units of machine equipment has been developed. The tooling for basing the working part of the blade on the principle of six-point basing adapted to the design of the machine tool is realised. The geometrical parameters of the obtained blade were analysed with its mathematical model by 3D scanning method.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.