| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 06026 | |
| Number of page(s) | 8 | |
| Section | Agricultural Mechanization, Civil Engineering and Energetics | |
| DOI | https://doi.org/10.1051/e3sconf/202339006026 | |
| Published online | 01 June 2023 | |
Strength and deformability of high strength concrete with superplasticizer S-3 under dynamic loading
Bukhara Engineering Technological Institute, Bukhara, Uzbekistan
* Corresponding author: moy_e-mail@inbox.ru
The results of experimental studies of the strength and deformative properties of concretes with the addition of superplasticizer S-3 and without additives, of various compositions under dynamic loads, the rate of application of dynamic action averaged 700 MPa/sec are presented. The coefficient of dynamic strengthening of concrete is determined as the ratio of prismatic strength under static and dynamic loads for the studied concretes with and without the addition of S-3, the value of which varies from 1.14 to 1.28, the significant effect of the additive was not detected. Graphs of the dependence of the ratios of elastic modulus and ultimate deformations on the loading rate and the deformation rate are presented. According to the main deformative characteristics under dynamic loading, the studied concretes with and without additives differ little from each other.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.