| Issue |
E3S Web Conf.
Volume 398, 2023
International Conference on Advances in Agrobusiness and Biotechnology Research (ABR 2023)
|
|
|---|---|---|
| Article Number | 01035 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/202339801035 | |
| Published online | 22 June 2023 | |
Investigation of the Efficiency of Manufacturing Polymer Molds by FDM-Printing
Ulyanovsk State Technical University, Ulyanovsk, Russia
* Corresponding author: kec.ulstu@mail.ru
The results of experimental studies of the efficiency of manufacturing polymer foundry models by the FDM method are presented. Rational consumables for 3D-printing are revealed. The optimal values of the shrinkage value of the 3D-model during printing and the parameters of the 3D-printer operation mode are revealed. It has been established that polymer casting molds are rationally manufactured by FDM printing, using ABS-plastic as a consumable, while making a correction to linear dimensions at the stage of creating a 3D-model to eliminate plastic shrinkage.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.