Open Access
| Issue |
E3S Web Conf.
Volume 398, 2023
International Conference on Advances in Agrobusiness and Biotechnology Research (ABR 2023)
|
|
|---|---|---|
| Article Number | 01035 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/202339801035 | |
| Published online | 22 June 2023 | |
- S. Singh, R. Singh, Precision investment casting: A state of art review and future trends, Journal of Engineering Manufacture. 12 (2016) 2143–2164. [CrossRef] [Google Scholar]
- M. Domingo-Espin [et al.], Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts, Materials & Design. 83 (2015) 670–677 [CrossRef] [Google Scholar]
- W.S.W. Harun [et al.], Characteristic studies of collapsibility of ABS patterns produced from FDM for investment casting, Materials Research Innovations. 3 (2009) 340–343. [CrossRef] [Google Scholar]
- J. Pieklo, M. Maj, Methods of Additive Manufacturing used in the Technology of Skeleton Castings, Archives of Metallurgy and Materials. 2 (2014) 699–702. [CrossRef] [Google Scholar]
- G.N. Petrova, E.Ya. Beider, Construction materials based on reinforced thermoplastics Chemistry and Materials Science, Russian Journal of General Chemistry. 5 (2011) 1001–1007 [CrossRef] [Google Scholar]
- L. Novakova-Marcincinova, I. Kuric, Basic and Advanced Materials for Fused Deposition Modeling Rapid Prototyping Technology, Manufacturing and Industrial Engineering. 11 (2012) 24–27. [Google Scholar]
- D. Croccolo, M. De Agostinis, G. Olmi, Experimental characterization and analytical modelling of the mechanical behavior of fused deposition processed parts made of ABS- M30, Computational Materials Science. 79 (2013) 506–518. [CrossRef] [Google Scholar]
- B. Turner, R. Strong, S. Gold, A review of melt extrusion additive manufacturing processes: I. Process design and modeling, Rapid Prototyping Journal. 20/3 (2014) 192–204 [CrossRef] [Google Scholar]
- S.H. Huang, P. Liu, A. Mokasdar, L. Hou, Additive manufacturing and its societal impact: a literature review, International Journal of Advanced Manufacturing Technology. 67 (2013) 1191–1203. [CrossRef] [Google Scholar]
- N. Hill, M. Haghi, Deposition direction-dependent failure criteria for fused deposition modelingpolycarbonate, Rapid Prototyping Journal. 20/3 (2014) 221–227. [CrossRef] [Google Scholar]
- S.H. Masood, W.Q. Song, Development of new metal/polymer materials for rapid tooling using Fused deposition modeling, Materials and Design. 25 (2004) 587–594. [CrossRef] [Google Scholar]
- H. Bikas, P. Stavropoulos, G. Chryssolouris, Additive manufacturing methods and modeling approaches: a critical review, International Journal of Advanced Manufacturing Technology. 83 (2016) 389–405. [CrossRef] [Google Scholar]
- I. Durgun, R. Ertan, Experimental investigation of FDM process for improvement of mechanical properties and production cost, Rapid Prototyping Journal. 20/3 (2014) 228–235. [CrossRef] [Google Scholar]
- J.C. Riddick [et al.], Fractographic analysis of tensile failure of acrylonitrile-butadiene- styrene fabricated by fused deposition modeling, Additive Manufacturing. 11 (2016) 49–59. [CrossRef] [Google Scholar]
- S. Dul, L. Fambri, A. Pegoretti, Fused deposition modelling with ABS-graphene nanocomposites, Composites. 85 (2016) 181–191. [CrossRef] [Google Scholar]
- I. Gajdos, J. Slota, Influence of Printing Conditions on Structure in FDM Prototypes, Tehnicki Vjesnik. 20 (2013) 231–236. [Google Scholar]
- G.N. Petrova, P.L. Zhuravleva, I.V. Iskhodzhanova, E. Ya. Beider, Influence of Carbon Fillers on Properties and Structure of Polyethylene-Based Polymer Composites, Nanotechnologies in Russia. 5-6 (2014) 305–310. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.