| Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
|---|---|---|
| Article Number | 04026 | |
| Number of page(s) | 7 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202340104026 | |
| Published online | 11 July 2023 | |
Linear plow with disk angle
1 Karshi Engineering-Economics Institute, Karshi, Uzbekistan
2 Termez State University, Termez, Uzbekistan
* Corresponding author: dilsabochoriyeva1984@gmail.com
The study aims to substantiate the design scheme of a linear plow with a disk angle. The authors have developed a linear plow with a disk plow for smooth, furrowless plowing. The proposed plow has disc lugs, screw housings, and guide plates. The technological scheme turnover of polygonal layers formed by disk pre-plates, the scheme mutual arrangement housings and guide plates, and the general view laboratory-field installation for conducting experiments are given. During the experiments, the degree of sealing plant residues, height irregularities on the surface arable land, and the traction resistance device were used to evaluate the performance plow. To ensure the required quality work with minimal traction resistance, a linear plow must be equipped with disc pre-lugs installed in front housings along their field cut line. When installing a disk prep lug with a working surface facing towards the turn formation, the degree sealing plant residues and the height of irregularities is 92-95% and 4.3-5 cm, respectively, which fully complies with agro technical requirements.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.