| Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
|---|---|---|
| Article Number | 04025 | |
| Number of page(s) | 7 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202340104025 | |
| Published online | 11 July 2023 | |
Formation of diffusion nitride-oxide coatings
Karshi Engineering-Economics Institute, Karsh, Uzbekistan
* Corresponding author: boynazarov_63@mail.ru
It is known that nitro-oxide coatings were developed based on nitriding, which are obtained using a two-stage technology consisting of nitriding at the first stage of the process and vaporization at the second stage. Such processing provides high physical and mathematical characteristics of hardened parts.
This technological process was improved by us due to preliminary oxidation, which made it possible to accelerate the production of nitride-oxide with the necessary physical and mechanical properties.
This work makes a theoretical calculation of the oxidation processes and subsequent nitriding of steels and a comparison with experimental data on the example of 38X2MYA. The article presents an analysis of the formation of oxynitride diffusion protective layers obtained by a three-stage nitriding method at a temperature of 580° C, which consists of preliminary oxidation, nitriding, and subsequent steam oxidation. The article also describes the effect of the oxide film on the nitriding process during preliminary oxidation and nitriding under short-term conditions at a temperature of 580 S.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.