| Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
|---|---|---|
| Article Number | 10027 | |
| Number of page(s) | 5 | |
| Section | Transport Mechanical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202340210027 | |
| Published online | 19 July 2023 | |
Improving the efficiency of the cutting tool based on its modification
Peter the Great St. Petersburg Polytechnic University, 195251 St. Petersburg, Russia
* Corresponding author: timosha78.53@mail.ru
Currently, carbide cutting tools are mainly used for processing blanks of machine parts. Increasing the working life of carbide plates is one of the urgent tasks in mechanical engineering. The paper proposes to increase the working life due to the complex modification of the working surfaces of the carbide tool. Modification of the tool surface is proposed to be carried out on the basis of electron beam alloying with an alloy based on niobium and hafnium, followed by the application of a wear-resistant coating of titanium aluminitride.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.