| Issue |
E3S Web Conf.
Volume 460, 2023
International Scientific Conference on Biotechnology and Food Technology (BFT-2023)
|
|
|---|---|---|
| Article Number | 10043 | |
| Number of page(s) | 6 | |
| Section | Agricultural Engineering and Mechanization | |
| DOI | https://doi.org/10.1051/e3sconf/202346010043 | |
| Published online | 11 December 2023 | |
Technology of magnetic abrasive polishing of tools for threading in stainless steel products
Pskov State University, Sovetskaya Ulitsa, 21, 180000 Pskov, Russia
* Corresponding author: timosha78.53@mail.ru
Continuously increasing demands on the accuracy and durability of machine parts make it possible to expand the range of parts that need finishing machining operations. Nowadays, known methods often do not meet the requirements of intensifying metalworking and improving the performance properties of individual stainless steel parts and products, which leads to the search for the development of new methods for the final processing of various surfaces. The destruction of threaded connections operating under dynamic loads leads to emergency and unscheduled stops of machines. The performance properties of threaded connections largely depend on the quality of the faying surface. One of these methods is magnetic abrasive treatment, which is increasingly being used in practice to solve specific technological problems.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.