| Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
|---|---|---|
| Article Number | 02013 | |
| Number of page(s) | 10 | |
| Section | Agricultural Engineering and Mechanization | |
| DOI | https://doi.org/10.1051/e3sconf/202341302013 | |
| Published online | 11 August 2023 | |
Tensile behavior of a laminated magnesium-aluminum composite with axial elliptical holes
Volgograd State Technical University, Lenina ave. 28, 400005 Volgograd, Russia
* Corresponding author: mv@vstu.ru
A 3D finite element simulation of the behavior of a prismatic sample of a magnesium-aluminum composite material AMg6-AD1-MA2-1 with an elliptical defect in the AD1 layer under axial tension was carried out, its strength and the change in the stress-strain state were determined when the thickness of the AD1 layer varied from 5 to 1, 25 mm. A change in the stress-strain state and strength during perforation transfer to the MA2-1 layer was revealed.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.