| Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
|---|---|---|
| Article Number | 02045 | |
| Number of page(s) | 7 | |
| Section | Agricultural Engineering and Mechanization | |
| DOI | https://doi.org/10.1051/e3sconf/202341302045 | |
| Published online | 11 August 2023 | |
Justification choice parameters material input receiving and distributing device in the horizontal type air grain cleaning machine
1 Don State Technical University, 1, Gagarin Sq., 344003 Rostov-on-Don, Russia
2 FGBNU «Federal Scientific Agroengineering Center VIM» 1st Institutskiy proezd, house 5, 109428 Moscow, Russia
3 Russian State Agrarian University-Moscow Agricultural Academy named after K.A. Timiryazev, Timiryazevskaya street, house 49, 127550 Moscow, Russia
* Corresponding author: lyudmila.vl.kravchenko@yandex.ru
The paper presents studies to determine the angle of inclination of the surface from the coefficient of friction for organic glass in an air grain cleaning machine. Earlier studies of the physico-mechanical properties of grain seeds have shown that for steel, the angle of descent of wheat is 36.2 – 37 degrees at a humidity of 15%-16%.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.