Open Access
| Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
|---|---|---|
| Article Number | 02045 | |
| Number of page(s) | 7 | |
| Section | Agricultural Engineering and Mechanization | |
| DOI | https://doi.org/10.1051/e3sconf/202341302045 | |
| Published online | 11 August 2023 | |
- I. Badretdinov, et al. "Mathematical modeling of the grain material separation in the pneumatic system of the grain-cleaning machine." Journal of Applied Engineering Science, 17(4), 529-534 (2019) [CrossRef] [Google Scholar]
- A. M. Giyevskiy, et al., Substantiation of basic scheme of grain cleaning machine for preparation of agricultural crops seeds, IOP Conference Series: Materials Science and Engineering, IOP Publishing, 327(4) (2018) [Google Scholar]
- L. Zhou, et al., DEM parameter calibration of maize seeds and the effect of rolling friction, Processes, 9(6), 914 (2021) [CrossRef] [Google Scholar]
- L. Wang, R. Li, B. Wu, Z. Wu, Z. Ding, Determination of the coefficient of rolling friction of an irregularly shaped maize particle group using physical experiment and simulations. Particuology, 38, 185–195 (2018) [CrossRef] [Google Scholar]
- T. Roessler, C. Richter, A. Katterfeld, F. Will, Development of a standard calibration procedure for the DEM parameters of cohesionless bulk materials—Part I: Solving the problem of ambiguous parameter combinations, Powder Technol, 343, 803–812 (2019) [CrossRef] [Google Scholar]
- C. Coetzee, Calibration of the discrete element method: Strategies for spherical and non-spherical particles. Powder Technol, 364, 851–878 (2020) [CrossRef] [Google Scholar]
- Z. R. Chen, J. Q. Yu, D. M. Xue, Y. Wang, Q. Zhang, L. Q. Ren, An approach to and validation of maize-seed-assembly modelling based on the discrete element method. Powder Technol, 328, 167–183 (2018) [CrossRef] [Google Scholar]
- L. Shi, W. Zhao, B. Sun, W. Sun, Determination of the coefficient of rolling friction of irregularly shaped maize particles by using discrete element method. Int. J. Agric. Biol. Eng., 13, 15–25 (2020) [Google Scholar]
- L. Zhou, J. Q. Yu, Y. Wang, D. X. Yan, Y. J. Yu, A study on the modelling method of maize-seed particles based on the discrete element method. Powder Technol, 374, 353–376 (2020) [CrossRef] [Google Scholar]
- L. J. Wang, W. X. Zhou, Z. J. Ding, X. X. Li, C. G. Zhang, Experimental determination of parameter effects on the coefficient of restitution of differently shaped maize in three-dimensions. Powder Technol, 284, 187–194 (2015) [CrossRef] [Google Scholar]
- C. González-Montellano, J. M. Fuentes, E. Ayuga-Téllez, F. Ayuga, Determination of the mechanical properties of maize grains and olives required for use in DEM simulations. J. Food Eng., 111, 553–562 (2012) [CrossRef] [Google Scholar]
- J. Hlosta, D. Zurovec, J. Rozbroj, A. Ramirez-Gomez, J. Necas, J. Zegzulka, Experimental determination of particle-particle restitution coefficient via double pendulum method. Chem. Eng. Res. Des., 135, 222–233 (2018) [CrossRef] [Google Scholar]
- USA, American Society of Agricultural Engineers. Compression Test of Food Materials of Convex Shape, ASAE Standards. Stand. Eng. Pract, 48, 592–599 (2002) [Google Scholar]
- M. B. Coskun, I. Yalcin, C. Ozarslan, Physical properties of sweet corn seed (Zea mays saccharata Sturt.). J. Food Eng., 74, 523–528 (2006) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.