| Issue |
E3S Web Conf.
Volume 417, 2023
III International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2023)
|
|
|---|---|---|
| Article Number | 03018 | |
| Number of page(s) | 11 | |
| Section | Energy Saving and Energy Efficiency of Mining Enterprises, Other Industries and Transport Infrastructure | |
| DOI | https://doi.org/10.1051/e3sconf/202341703018 | |
| Published online | 21 August 2023 | |
Environmental indicators of dual-fuel hydrogen engine
Bauman Moscow State Technical University, 105005 Moscow, Russia
* Corresponding author: askuleshov@mail.ru
Hydrogen is considered as a promising gas engine fuel for diesel engines. The problems that occur when converting engines to work on hydrogen are presented. Reliable ignition of hydrogen in the engine is achieved by implementing a two-fuel cycle. In this case, hydrogen ignites from the diesel fuel combustion. Calculations of diesel fuel and hydrogen supply effect on the workflow of a dual-fuel engine of the D-245 type were realized. The main indicators of the engine are calculated when the hydrogen supply changes from 0 to 80%. A criterion characterizing the total toxicity of engine exhaust gases is proposed. The optimal supply of hydrogen was 40%. With such a supply of hydrogen, there was a decrease in the smokiness of exhaust gases by 53%, carbon dioxide emissions by 44%, but the emission of nitrogen oxides increased by 27%. With an increase in the supply of hydrogen from 0 to 40%, the maximum calculated effective performance of engine increased by 7.1%.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.