| Issue |
E3S Web Conf.
Volume 417, 2023
III International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2023)
|
|
|---|---|---|
| Article Number | 03017 | |
| Number of page(s) | 11 | |
| Section | Energy Saving and Energy Efficiency of Mining Enterprises, Other Industries and Transport Infrastructure | |
| DOI | https://doi.org/10.1051/e3sconf/202341703017 | |
| Published online | 21 August 2023 | |
Improving the efficiency of mine compressor units based on the improvement of their cooling system
Navoi State University of Mining and Technologies, Navoi, 210100, Uzbekistan
* Corresponding author: r.u.djuraev@yandex.ru
Resource saving is one of the most important problems in the world, including for such an energy-intensive process as the operation of mining compressor units. In the mining industry, along with electrical energy, pneumatic energy or compressed air energy is widely used. Compressor units that generate this energy are the most energy-intensive equipment of the enterprise, the share of which in the balance of mining enterprises is 20-35%. The indicators of technological processes of mining enterprises depend on the level of perfection of compressor installations. Given the widespread use of compressed air, there is a need to reduce operating costs, based on the development of effective technical solutions in the production of compressed air in industrial enterprises The tasks associated with increasing the energy efficiency of the operation of compressor units have not been fully resolved.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.