| Issue |
E3S Web Conf.
Volume 417, 2023
III International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2023)
|
|
|---|---|---|
| Article Number | 06013 | |
| Number of page(s) | 6 | |
| Section | Infrastructure Problems of Mining Engineering, Transport, Electromechanics and Energy | |
| DOI | https://doi.org/10.1051/e3sconf/202341706013 | |
| Published online | 21 August 2023 | |
Selecting the operating mode of roller machines
1 Tashkent University of Architecture and Civil Engineering, Tashkent, Uzbekistan
2 University of Tashkent for Applied Sciences, Tashkent, Uzbekistan
3 Tashkent State University of Economics, Tashkent, Uzbekistan
* Corresponding author: khurramov86sh@gmail.com
A dependence of the distance between the rolls on the radis of the roll, the thickness of the processed material, and the coefficient (angle) of friction of the processed material on the surface of the roll coating were theoretically studied. An experimental study revealed the dependence of the distance between the rolls on the intensity of the load, the radius of the roll, and the thickness of the material being processed. It was found that with an increase in the roll radius and load intensity, and with a decrease in the thickness of the material being processed, the distance between the rolls decreases.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.