| Issue |
E3S Web Conf.
Volume 434, 2023
4th International Conference on Energetics, Civil and Agricultural Engineering (ICECAE 2023)
|
|
|---|---|---|
| Article Number | 02009 | |
| Number of page(s) | 6 | |
| Section | Civil Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202343402009 | |
| Published online | 12 October 2023 | |
Study on the conditions of material capture by pairs of rolls of squeezing machines
1 Tashkent University of Architecture and Civil Engineering, Navai str.13, 100011 Tashkent, Uzbekistan
2 Tashkent State Transport University, Adilxodyaev str. 2, 100067 Tashkent, Uzbekistan
* Corresponding author: komilturgunov@mail.ru
This paper is devoted to the analysis of the condition for material capture with pairs of rolls of squeezing machines. Calculation formulas for the parameters of roll pairs of squeezing machines are given, such as: contact angles, minimum distance between the rolls, the thickness of the processed material after squeezing. It has been established that the capture of material in the roll pairs of squeezing machines is determined by the center distance between the rolls, the thickness of the processed material and the coefficients of friction of the rolls on the processed material. It was determined that the displacement of the upper roll relative to the lower roll does not affect the values the nip angles.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.