| Issue |
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
|
|
|---|---|---|
| Article Number | 01239 | |
| Number of page(s) | 10 | |
| DOI | https://doi.org/10.1051/e3sconf/202343001239 | |
| Published online | 06 October 2023 | |
Experimental Investigation and Optimization of EDM process in different Paramaters on NICKEL material (nimonic 8A)
Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Telangana, India
* Corresponding author: sateeshnagari1@gmail.com
Newly prepared Nickel alloy (Nimonic80A As Per ASTM B637 Alloy-N07080) using powder metallurgy is considered in this investigation. In Conventional machining, Nickel alloys produce higher tool wear rate , poor surface Finish, but this can be reduced by Electrical Discharge Machining (EDM) method. Nickel alloy(Nimonic80Aas per ASTM B637 Alloy-N07080) presently used in wide variety of applications such as Automobiles, Aerospace industries, because of their high strength to temperature ratio. In this project, Nickel alloy (Nimonic80A as per ASTM B637 Alloy-N07080) is taken with different types of EDM Properties. Before that Chemical characteristics in addition machinelike possessions as well as to a degree Tensile test,Charpy test are administered on for judgment substance moreover severity of the material plus from that timeforward we acted EDM process by utilizing of TAGUCHI procedure. Results of tests are resolved to select high quality surface finish moreover fastest process for material request.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.