Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01239
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202343001239
Published online 06 October 2023
  1. Li Liqing, Wang Yunhang. 20th CIRP conference on electro physical and chemical machining.(2020) 95, 482–487. [Google Scholar]
  2. Ma Liangqi, Wang Xiaoying, Song Tao, Long Jin, Yan Buyun, Yu Zuyuan.Conference on Electro Physical and ChemicalMachining .(2020)95, 443–448 [Google Scholar]
  3. Giancarlo Maccarinia, Giuseppe Pellegrini, Chiara Ravasio Flexible Automation and Intelligent Manufacturing,,Procedia Manufacturing 51 (2020) 834–841 [CrossRef] [Google Scholar]
  4. Daisuke Yanagida*, Takayuki Nakamoto, Hisashi Minami, Takao Miki, Sohei Uchida, Osaka Research Institute ofIndustrial Science and Technology, Japan.Watanabe 449–453 Vol 95(2020) 449–453 [Google Scholar]
  5. Jianguo Leia, Xiaoyu Wu, Bin Xu, Likuan Zhu. electro physical and chemical machining. College of Mechatronics and Control Engineering, Shenzhen University Vol 95 (2020) 578–583 [Google Scholar]
  6. Wei Lianga, Hao Tonga, Baoquan Lib, Yong Lia Electro Physical and Chemical Machining vol 95. [Google Scholar]
  7. Ultra-precisionManufacturing Equipments and Control, Tsinghua University, (2020) 566–571 [Google Scholar]
  8. Tzu-Wei Huang, Dong-Yea Sheub. Electro Physical and Chemical Machining. National Taipei University of Technology, vol 95. (2020) 590–593. [Google Scholar]
  9. ShunFei Shi, Fei Yang, DeFan Qin, DaBo Xu. Electro Physical and Chemical Machining.Vol 95. aNanjing University ofScience & Technology (2020) 195–199. [Google Scholar]
  10. Hidenori Inada, Hiroshi Inada, H. Yagishitac. SME North American Manufacturing Research,vol 45. Hi- TAK Co. Ltd.,Numazu, Shizuoka, 410-0874, Japan, (2020) 436–442. [Google Scholar]
  11. Huan Liu, Jicheng Bai. Electro Physical and Chemical Machining. School of Mechatronics Engineering, Harbin Institute ofTechnology, Harbin,vol 95. (2020) 220–225. [Google Scholar]
  12. S. Vinoth Kumar, M. Pradeep Kumar. Department of Mechanical Engineering, CEGC. Effect of process parameters on theperformance of EDM process with ultrasonic assisted cryogenically cooled electrode. J Manuf Process 2012;14:393–402 [CrossRef] [Google Scholar]
  13. Ma Liangqi, Wang Xiaoying, Song Tao, Long Jin, Yan Buyun, Yu Zuyuan. Int. J Adv Manuf. Technology 47, 2010, pp395–402. [Google Scholar]
  14. Amrish Raj.D, Senthilvelan.T, Procedia Manufacturing Materials Today: Proceedings 2 (2015) 1682 – 1690 [Google Scholar]
  15. Manisha Priyadarshinia, Kamal Palb,Hisashi Minami, Veer Surendra Sai University of Technolgy, Burla, Sambalpur- : Proceedings 2 (2015) 2472 – 2481 [Google Scholar]
  16. C. Mascaraque-Ramirez, P. Francoa Universidad Politecnica de Cartagena, Departamento de Ingenieria de Materiales yFabricacion, [Google Scholar]
  17. Campus Muralla del Mar, C/ Doctor Fleming s/n, 30202 Procedia Engineering 132 (2015) 671 – 678 [Google Scholar]
  18. U. Maradia, R. Knaak, W. Dal Busco, M. Institute of Machine Tools and Manufacturing (IWF), Leonhardstrasse 21. [Google Scholar]
  19. Wear mechanism and preventive measure of elec-trode in micro-EDM. Appl Mech Mater 2009; 16:540–3 [Google Scholar]
  20. Cheol-Soo Lee, Eun-Young Heo, Jong-Min Kim, Department of Mechanical Engineering, Sogang University, SeoulMach. Tools Manuf 37 (No.2) (1997) 193–197. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.