Issue |
E3S Web Conf.
Volume 431, 2023
XI International Scientific and Practical Conference Innovative Technologies in Environmental Science and Education (ITSE-2023)
|
|
---|---|---|
Article Number | 02020 | |
Number of page(s) | 7 | |
Section | Energy Technology and Energy Systems | |
DOI | https://doi.org/10.1051/e3sconf/202343102020 | |
Published online | 13 October 2023 |
Design optimization of the suspension unit of the liner in the combustion chamber housing
1 Kazan National Research Technical University named after A.N.Tupolev-KAI, 10 K.Marx Street, 420111 Kazan, Russia
2 JSC «Ural works of civil aviation», 61 Khimikov Street, 420091 Kazan, Russia
* Corresponding author: pvelikanov@mail.ru
The design of the suspension unit of the flame tube in the housing of the annular combustion chamber of a ground-based gas turbine installation of a gas pumping unit is given for placing it in a device for fixing the flame tube in the combustion chamber housing, where automatic clearance selection is required arising between the contacting surfaces of the docking nodes of the combustion chamber and the nozzle apparatus of the turbine, when the combustion chamber is operating as part of the engine. The proposed design of the suspension unit of the flame tube in the annular combustion chamber housing makes it possible to increase the reliability and resource of the combustion chamber and, in general, the entire ground-based gas turbine installation by eliminating the jamming of the split rings in the cups of the suspension units and the misalignment of the pushers relative to the suspension units and split support rings.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.