Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
---|---|---|
Article Number | 00050 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/201912600050 | |
Published online | 30 October 2019 |
The study of the working body of a ridge seeder in laboratory settings
Ulyanovsk State Agrarian University,
Ulyanovsk,
Russia
* Corresponding author: evg-zykin@yandex.ru
The authors consider the design of a ridge seeder in the article, the practical implementation of which will allow the machine and tractor unit to perform pre-sowing cultivation for one pass, sowing seeds in a moist soil on a compacted bed, form a soil ridge of a required size over the seeds and roll it on three sides, finally forming the soil crest with a required size and density. The authors have also substantiated the design features and operation parameters of the working bodies of the ridge seeder.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.