| Issue |
E3S Web Conf.
Volume 431, 2023
XI International Scientific and Practical Conference Innovative Technologies in Environmental Science and Education (ITSE-2023)
|
|
|---|---|---|
| Article Number | 03013 | |
| Number of page(s) | 7 | |
| Section | Mining, Geology and Geotechnology | |
| DOI | https://doi.org/10.1051/e3sconf/202343103013 | |
| Published online | 13 October 2023 | |
Effect of filler-ash on the properties of epoxy resin composite
Almetyevsk State Oil Institute, Lenin str., 2, Almetyevsk. 452754, Russia
* Corresponding author: zalyatdinovaa@agni-rt.ru
At present in Russia a huge amount of ash and slag waste from thermal power plants is accumulated in dumps and heaps. For several decades the problem of utilisation of non-combustible residues generated during coal combustion has been studied. These wastes are unfavourable for the environment due to toxic substances and heavy metals in their composition. Ash and slag waste is a type of waste generated during combustion of coal with high ash content in the boiler at thermal power plants. The use of ash as a filler in thermal insulation material not only reduces the cost of scarce and expensive materials, but also increases the strength characteristics of the composite material. This paper deals with the method of ash utilisation, use of ash as a filler component in composite material. The aim of the study is to develop the composition of insulation of pipelines and their tensile strength tests. The task is to test prepared specimens of glass fibre, epoxy resin, hardener and ash under tensile strength on a universal testing machine REM-A.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.