| Issue |
E3S Web of Conf.
Volume 443, 2023
II International Conference on Environmental Technologies and Engineering for Sustainable Development (ETESD-II 2023)
|
|
|---|---|---|
| Article Number | 04010 | |
| Number of page(s) | 8 | |
| Section | Innovative Technologies of Agriculture, Civil Engineering and Environmental Research | |
| DOI | https://doi.org/10.1051/e3sconf/202344304010 | |
| Published online | 09 November 2023 | |
Modeling residual moisture content of leather
1 Institute of Mechanics and Seismic Stability of Structures named after M.T. Urazbaev, Tashkent, Uzbekistan
2 Tashkent University of Architecture and Civil Engineering, Tashkent, Uzbekistan
3 Non-governmental University of Economy and Pedagogy, Karshi, Uzbekistan
* Corresponding author: shavkat-xurramov59@mail.ru
The study is devoted to the analytical description of the residual moisture of leather (semi-finished leather product after dyeing) taking into account the deformation and filtration properties of the semi-finished leather product at this stage. Mathematical models of changes in the removed fluid, hydraulic pressure in the area of leather squeezing, and residual moisture content are determined. The study of the squeezing process based on these models makes it possible to determine with sufficient accuracy the appropriate parameters for roller squeezing of leather, necessary for the rational design and operation of squeezing machines. A condition was established for obtaining minimum residual moisture during roller squeezing, which allows for an increase in the efficiency of roller squeezing of leather.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.