| Issue |
E3S Web of Conf.
Volume 443, 2023
II International Conference on Environmental Technologies and Engineering for Sustainable Development (ETESD-II 2023)
|
|
|---|---|---|
| Article Number | 05007 | |
| Number of page(s) | 6 | |
| Section | Technologies for Cleaning Up Environmental Damage and Waste Disposal | |
| DOI | https://doi.org/10.1051/e3sconf/202344305007 | |
| Published online | 09 November 2023 | |
Efficiency analysis of roller squeezing of leather
Almalik branch of Tashkent State Technical University, Tashkent, Uzbekistan
* Corresponding author: shavkat-xurramov59@mail.ru
The study is devoted to the theoretical modeling of the residual moisture in leather, taking into account the phenomenon of its contact interaction with working rolls. Analytical formulas were derived that describe the patterns of changes in moisture content during the process of roller squeezing of leather. A theoretical model of residual moisture in leather during roller squeezing was developed. It was determined that with increasing roll radius and initial thickness of leather, the residual moisture content increases. It was revealed that with an increase in the initial moisture content of leather, its residual moisture content increases and asymptotically approaches a certain value.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.