| Issue |
E3S Web of Conf.
Volume 458, 2023
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2023)
|
|
|---|---|---|
| Article Number | 03030 | |
| Number of page(s) | 9 | |
| Section | Low Carbon Mobility and Logistics | |
| DOI | https://doi.org/10.1051/e3sconf/202345803030 | |
| Published online | 07 December 2023 | |
Ensuring interchangeability in aircraft production using cutting stands
1 Moscow Aviation Institute (National Research University), 125993 Moscow, Russia
2 Moscow State University of Civil Engineering, 129337 Moscow, Russia
The paper discusses the basic principles and modern views on methods for ensuring interchangeability when cutting joints and docking airframe units, describes the purpose, provides a layout diagram and describes the design of the aircraft fin cutting stand, the equipment used and tools used to ensure the interchangeability of aircraft airframe units at joints.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.