| Issue |
E3S Web Conf.
Volume 460, 2023
International Scientific Conference on Biotechnology and Food Technology (BFT-2023)
|
|
|---|---|---|
| Article Number | 10035 | |
| Number of page(s) | 5 | |
| Section | Agricultural Engineering and Mechanization | |
| DOI | https://doi.org/10.1051/e3sconf/202346010035 | |
| Published online | 11 December 2023 | |
Investigation on impact of large-size blades’ heat treatment modes on microstructure formation
1 Naberezhnye Chelny Institute (branch of Kazan Federal University), Mira ave. 68/19, Naberezhnye Chelny, 423812 Republic of Tatarstan, Russia
2 Scientific and Production Association "Technopark of Aviation Technologies", Tramwaynaya str. 5 block 1, 450039 Ufa, Russia
* Corresponding author: kashapov.fidail@mail.ru
The resource of a cast section directly depends on its density and quality of micro-macrostructure. The article presents the results of combined heat treatment application. On the basis of comparison of research results the application of homogenisation for cast billets from IN-792-5A alloy is justified. The work on the selection of technological modes to minimise the content of γ' phase in the body of the cast billet has been carried out. The object of the study was a cast billet of the work blade of the 4th stage.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.