| Issue |
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
|
|
|---|---|---|
| Article Number | 01216 | |
| Number of page(s) | 27 | |
| DOI | https://doi.org/10.1051/e3sconf/202343001216 | |
| Published online | 06 October 2023 | |
Response of Various Extrusion Parameters to Different Outputs: Review
1 Department of Mechanical and Mechatronics Engineering, Afe Babalola University, PMB 5454, Ado Ekiti, Nigeria.
2 Department of Mechanical Engineering, Federal University Oye Ekiti, 371104, Nigeria
* Corresponding author: Azeeztemitayo221@abuad.edu.ng
Extrusion as a process involves the introduction of compressive force to drive metal sample out of the die in order to subject it to plastic deformation which in turn will enhance both mechanical and metallurgical properties of aluminum. One input parameter can as well impact other parameters of extrusion. The extent of mechanical properties improvement and effects on other factors depends on adequate selection of the process (input) parameters. The interaction of these parameters influenced the responses (output parameters) in different way. Therefore, this review paper focused on extrusion processes, different extrusion input and responses and related work by different researchers on how different extrusion parameters influences different responses
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.