| Issue |
E3S Web Conf.
Volume 474, 2024
X International Annual Conference “Industrial Technologies and Engineering” (ICITE 2023)
|
|
|---|---|---|
| Article Number | 01024 | |
| Number of page(s) | 7 | |
| Section | Energy Sciences, Engineering and Industry | |
| DOI | https://doi.org/10.1051/e3sconf/202447401024 | |
| Published online | 08 January 2024 | |
The influence of increasing the productivity of the carding machine on the quality indicators of the card sliver
M.Auezov South Kazakhstan University, Shymkent, Kazakhstan
* Corresponding author: abilda_1977@mail.ru
The paper investigated the influence of the rotation frequency of the take-up, main and doffing drums of the C60 carding machine from RIETER on the quality indicators of the card sliver. The raw material used was medium-fiber cotton with a fiber length of 26.5-28 mm. The experimental study was carried out with changing speed modes: rotation frequency of the main drum from 451 to 520 rpm, of the take-up drum from 1018 to 1400 rpm, of the doffing drum from 62 up to 72 rpm.The quality indicators of the produced card sliver were determined using an USTERTESTER-5 laboratory equipment. It was established that an increase in the speed mode of the main working bodies within the studied limits on carding machines does not cause a deterioration in the combing quality.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.