| Issue |
E3S Web Conf.
Volume 474, 2024
X International Annual Conference “Industrial Technologies and Engineering” (ICITE 2023)
|
|
|---|---|---|
| Article Number | 01025 | |
| Number of page(s) | 6 | |
| Section | Energy Sciences, Engineering and Industry | |
| DOI | https://doi.org/10.1051/e3sconf/202447401025 | |
| Published online | 08 January 2024 | |
The influence of the average residence time of the fiber in the set of the main drum and the flats of the carding machine on the carding degree
M.Auezov South Kazakhstan University, Shymkent, Kazakhstan
* Corresponding author: abilda_1977@mail.ru
The article presents the results of calculating the average residence time of the fiber in the flat set of the main carding zone for carding machines TS-03 (Trutzschler) and C60 (Rieter). The fiber carding degree in the “drum-flat” zone was studied. The carding degree by the teeth of the main drum of free fibers held by the needles of the flats and the carding degree by the needles of the flats of free fibers held by the teeth of the main drum were determined. The total carding degree in the “drum-flat” zone of the carding machine was calculated.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.