| Issue |
E3S Web Conf.
Volume 554, 2024
7th International Symposium on Resource Exploration and Environmental Science (REES 2024)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/202455401001 | |
| Published online | 30 July 2024 | |
Study on the influence of airflow disturbance on spray atomization
CCTEG Chongqing Research Institute, Chongqing 400037, China
The droplet distribution characteristics are one of the key factors that determine the dust suppression effect of spray system. In order to study the droplet distribution characteristics under different working conditions, the influence mechanism of wind speed and spray angle on droplet distribution characteristics was studied based on Fluent software. The results show that the increase of wind speed and spray angle will increase the lateral momentum of droplets, resulting in the increase of longitudinal height and lateral length of spray belt. The change of spray angle causes the change of the distribution ratio of transverse momentum and longitudinal momentum of droplets. With the increase of spray angle, the transverse momentum of droplets increases and the longitudinal momentum decreases, resulting in the increase of the longitudinal height and length of spray belt. In engineering practice, attention should be paid to the coordinated control of nozzle height, spray angle and airflow speed.
Key words: Spray dust suppression / Wind disturbance / Coal mine dust / Mass concentration distribution / numerical simulation
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.