| Issue |
E3S Web of Conferences
Volume 1, 2013
Proceedings of the 16th International Conference on Heavy Metals in the Environment
|
|
|---|---|---|
| Article Number | 14006 | |
| Number of page(s) | 4 | |
| Section | Emerging Elements / Pollutants | |
| DOI | https://doi.org/10.1051/e3sconf/20130114006 | |
| Published online | 23 April 2013 | |
Thallium in mineral resources extracted in Poland
1 Polish Geological Institute – National Research Institute, 00-975 Warszawa, POLAND
2 AGH University of Science and Technology, faculty of Geology, Geophisics and Environmental Protection, 30-059 Krakow, Poland
a izabela.bojakowska@pgi.gov.pl
b andrzej.paulo@interia.pl
Thallium concentrations in primary mineral commodities extracted in Poland and processed in high temperatures were determined by ICP-MS method. Samples of hard and brown coal, copper-silver and zinclead ores, argillaceous and calcareous rocks of different genesis and age were analyzed. The highest thallium concentrations occur in the zinc-lead ores, the average content being of 52.1 mg/kg. The copper ores contain in average 1.4 mg/kg of thallium. Hard coals from the Upper Silesian Coal Basin display higher thallium content than those exploited in the Lublin Coal Basin. Brown coals from Turow deposit distinguish by much higher values, 0.7 mg/kg Tl, than those from huge Bełchatów and smaller Konin-Turek region deposits. Average thallium concentrations in clays used for ceramic materials are lower than 1 mg/kg, except of Mio-Pliocene Slowiany deposit. The average content of thallium in the studied limestone and dolomite raw materials for cement, lime, and metallurgical flux, and refractories is very low in comparison to the average amounts in the world carbonate rocks.
Key words: thallium / pollution / coals / ores / argillaceous rocks / calcareous rocks
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.