| Issue |
E3S Web Conf.
Volume 14, 2017
Energy and Fuels 2016
|
|
|---|---|---|
| Article Number | 01042 | |
| Number of page(s) | 10 | |
| Section | Energy | |
| DOI | https://doi.org/10.1051/e3sconf/20171401042 | |
| Published online | 15 March 2017 | |
Power sources involving ~ 300W PEMFC fuel cell stacks cooled by different media
1 AGH University of Science and Technology, Faculty of Energy and Fuels, Krakow, Poland
2 Institute of Power Engineering Ceramic Department CEREL, Boguchwała, Poland
* Corresponding author: potoczek@agh.edu.pl
Two constructions of ~300W PEMFC stacks, cooled by different media, were analysed. An open-cathode ~300W PEMFC stack cooled by air (Horizon, Singapore) and a PEMFC F-42 stack cooled by a liquid medium (Schunk, Germany) were chosen for all of the investigations described in this paper. The potential for the design and construction of power sources involving fuel cells, as well as of a hybrid system (fuel cell-lithium battery) for mobile and stationary applications, is presented and discussed. The impact of certain experimental parameters on PEMFC stack performance is analysed and discussed.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.