E3S Web Conf.
Volume 15, 2017The 1st Scientific Practical Conference “International Innovative Mining Symposium (in memory of Prof. Vladimir Pronoza)”
|Number of page(s)||4|
|Section||Perspective Mining Technologies|
|Published online||07 April 2017|
The Length Of Bearing Pressure Zone For The Flat Seams Extraction In A Linear Deformation Rock
T.F. Gorbachev Kuzbass State Technical University, 650000, 28 Vesennyaya St., Kemerovo, Russia
* Corresponding author: firstname.lastname@example.org
The article describes the problem of numerical calculation of stress-strain state of the rock mass during flat seams extraction by finite el-ement method. The distribution of bearing pressure under changing the seam thickness and depth of development is described. The length of the bearing pressure zones for different references of the pressure was defined. The independence of the bearing pressure zone length on the depth of de-velopment was proved. The analytical dependence of the bearing pressure zone length on the seam thickness was obtained. This result defines the in-fluence of mining area on geo-mechanical condition of mine workings.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.