Issue |
E3S Web Conf.
Volume 17, 2017
9th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2017
|
|
---|---|---|
Article Number | 00037 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/20171700037 | |
Published online | 24 May 2017 |
The analysis of mercury content in coals and ashes
The University of Silesia, Faculty of Earth Sciences, 41-200 Sosnowiec, Będzińska 60 str., Poland
* Corresponding author: anna.szpak@mixbox.pl
It is well known that mercury that enters the atmosphere is a serious threat to the natural environment. From the available literature, it can be stated that fossil fuels are among the main carriers of this fuel. The question arises whether it is the right approach. While the enrichment of bituminous coal produces limited amounts of mercury, they are being released into the atmosphere as a result of the combustion of coal. The situation is similar in the case of biomass, which releases large amounts of mercury into the atmosphere when subjected to the combustion process. While bituminous coal is the carrier of mercury, the application of currently known technology, rational production and the use of fossil fuels make it possible to maximally minimize mercury emissions into the atmosphere. This study evaluated the mercury content in the ashes resulting from the combustion of bituminous coal subjected to the enrichment process. The samples were collected from ten mines located in the Polish part of the Upper Silesian Coal Basin (USCB). In total, thirty coal samples and thirty products of the combustion process were examined. All sixty samples were subjected to physicochemical analysis, including: moisture content, ash content, sulfur content, carbon content, and Gross Calorific Value.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.