Issue |
E3S Web Conf.
Volume 21, 2017
IInd International Innovative Mining Symposium (Devoted to Russian Federation Year of Environment)
|
|
---|---|---|
Article Number | 02021 | |
Number of page(s) | 6 | |
Section | Environment Problems in Mining Regions | |
DOI | https://doi.org/10.1051/e3sconf/20172102021 | |
Published online | 10 November 2017 |
Belt Aligning Revisited
T.F. Gorbachev Kuzbass State Technical University, 650000, 28 Vesennyaya St., Kemerovo, Russia
* Corresponding author: yvm@kuzstu.ru
The misalignment causes the greatest damage to the conveyor belt. As a result of the interaction of the moving belt with the stationary parts of the conveyor, the sides of the belt wear intensively. This results in reducing the life of the belt. The reasons for this phenomenon are well investigated, but the difficulty lies in the fact that they all act simultaneously. The belt misalignment prevention can be carried out in two ways: by minimizing the effect of causes and by aligning the belt. The construction of aligning devices and errors encountered in practice are considered in this paper. Self-aligning roller supports rotational in plan view are recommended as a means of combating the belt misalignment.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.