Issue |
E3S Web Conf.
Volume 21, 2017
IInd International Innovative Mining Symposium (Devoted to Russian Federation Year of Environment)
|
|
---|---|---|
Article Number | 03010 | |
Number of page(s) | 6 | |
Section | Innovations in Mining Machinery | |
DOI | https://doi.org/10.1051/e3sconf/20172103010 | |
Published online | 10 November 2017 |
Justification of the Shape of a Non-Circular Cross-Section for Drilling With a Roller Cutter
T.F. Gorbachev Kuzbass State Technical University, 650000,28 Vesennyaya St., Kemerovo, Russia
* Corresponding author: gdb@kuzstu.ru
The parameters of the shape of non-circular cross-section affect not only the process of blasting, but also the design of the tool and the process of drilling as well. In the conditions of open-pit mining, it is reasonable to use a roller cutter to produce a non-circular cross-section of blasting holes. With regard to the roller cutter, the impact of the cross-section shape on the oscillations of the axial force arising upon its rotation is determined. It is determined that a polygonal shape with rounded comers of the borehole walls connections and their convex shape, which ensures a smaller range of the total axial force and the torque deflecting the bit from the axis of its rotation is the rational form of the non-circular cross-section of the borehole in terms of bit design. It has been shown that the ratio of the number of cutters to the number of borehole corners must be taken into account when justifying the shape of the cross-section, both from the point of view of the effectiveness of the explosion action and from the point of view of the rational design of the bit.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.