E3S Web Conf.
Volume 22, 2017International Conference on Advances in Energy Systems and Environmental Engineering (ASEE17)
|Number of page(s)||8|
|Published online||07 November 2017|
Study of heat exchange processes in a screw ash cooler installation
Wrocław University of Science and Technology, Faculty of Mechanical and Power Engineering, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
* Corresponding author: email@example.com
The paper presents an example of the thermal-flow analysis of a bottom ash cooler cooperating with a circulating fluidized bed (CFB) boiler. The authors present the methodology of the conducted studies and examples of thermal balance calculations basing on measurement results. The comparison of two different ash coolers indicates a significant relationship between the outlet temperatures of the ash and cooling water depending on the construction and arrangement of the analysed ash coolers. The analysis presented in this paper enables determining the optimal rotation speed of the screw in order to achieve the required temperature of the slag depending on the actual working parameters of the CFB boiler. It provides an opportunity to optimize the heat exchange conditions in order to obtain the highest acceptable water temperature at the outlet of the ash cooler while adhering to safety regulations. The hot water could further be used for internal sanitary purposes or to support heating systems operating in the power plant.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.