E3S Web Conf.
Volume 22, 2017International Conference on Advances in Energy Systems and Environmental Engineering (ASEE17)
|Number of page(s)||7|
|Published online||07 November 2017|
Approach to the implementation of linear-assisted-based battery chargers
Eastern Barcelona School of Engineering (Escola d'Enginyeria de Barcelona Est, EEBE), Department of Electronics Engineering, Tech. University of Catalonia (UPC – BarcelonaTech), Diagonal-Besòs Campus. Eduard Maristany Ave., n° 10 – 14, E-08019 – Barcelona, Spain
* Corresponding author: firstname.lastname@example.org
This article shows the proposal of a linear-assisted regulator or linear-&-switching hybrid regulator with a constant switching frequency. The control loop of the system is based on the current-mode technique. The main disadvantage of a regulator with current-mode control is the inherent instability of the loop when switch duty ratios are greater than 0.5. In order to make stable the proposed linear-assisted regulator, the article shows the technique based on a slope compensation. This kind of voltage regulators is especially devoted to battery chargers in renewable energy systems.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.