E3S Web Conf.
Volume 26, 2018Seminary on Geomatics, Civil and Environmental Engineering (2017 BGC)
|Number of page(s)||5|
|Published online||05 January 2018|
The concept of estimation of elevator shaft control measurement results in the local 3D coordinate system
Gdansk University of Technology, Faculty of Civil and Environmental Engineering, Narutowicza St. 11/12, Gdansk, Poland
* Corresponding author: firstname.lastname@example.org
Geodetic control measurements play an important part because they provide information about the current state of repair of the construction, which has a direct impact on the safety assessment of its exploitation. Authors in this paper have focused on control measurements of the elevator shaft. The article discusses the problem of determining the deviation of elevator shaft walls from the vertical plane in the local 3D coordinate system. It presents a concept of estimation of measurements results base on the parametric method with conditions on parameters. The simulated measurement results were used to verify the concept presented in the paper.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.