Issue |
E3S Web Conf.
Volume 32, 2018
EENVIRO 2017 Workshop - Advances in Heat and Transfer in Built Environment
|
|
---|---|---|
Article Number | 01005 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/20183201005 | |
Published online | 21 February 2018 |
Impact of the formaldehyde concentration in the air on the sink effect of a coating material
1
LUSAC, Université de Caen Normandie, Saint-Lô, France
2
EDF Département EnerBAT, EDF Lab Les Renardières, France
* Corresponding author: anne-lise.tiffonnet@unicaen.fr
This study aims to characterize, from a numerical modelling, the sorption behaviour of a material (a plasticised flooring material) when it is exposed to a pollutant commonly encountered in indoor environments (formaldehyde). It deals with the influence of the pollutant concentration in the room air on the sink effect of the material. The numerical simulations are based on a macroscopic modelling using experimental test results obtained elsewhere. The consequences on the room inertia are also discussed, and analogies between mass transfer and heat transfer are highlighted.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.