Issue |
E3S Web Conf.
Volume 34, 2018
International Conference on Civil & Environmental Engineering (CENVIRON 2017)
|
|
---|---|---|
Article Number | 02018 | |
Number of page(s) | 8 | |
Section | Environment | |
DOI | https://doi.org/10.1051/e3sconf/20183402018 | |
Published online | 19 March 2018 |
The Study of Heavy Metals on Sediment Quality of Kuala Perlis Coastal Area
School of Environmental Engineering, Universiti Malaysia Perlis, 02600 Arau, Perlis, Malaysia
* Corresponding author: farahnaemah@unimap.edu.my
The contamination of heavy metals gives bad implications to the aquatic environment. Thus, a study was conducted to assess the sediment quality by using different contamination indices such as Enrichment Factor (EF), Geo-accumulation Index (Igeo), and Pollution Load Index (PLI). Each sediment sample was collected at the surface (0-15cm) at 5 locations based on the land use activity; jetty port (A), seaside restaurant (B), roadside area (C), power plant (D) and residential area (E). All samples were undergoes acid digestion and analyzed with AAS. Four elements identified from the sediment samples which are Cr, Cu, Pb and Zn were used to calculate the respective indices. Results show that, the highest EF value of Pb which categorized as very severe enrichment was at point E. Meanwhile minor enrichment was detected at point B for Cu while Cr and Zn at point A. Based on Igeo value the sediment quality along Kuala Perlis was in the unpolluted-moderately polluted condition (class 1). As for PLI it shows that the sediment of the coastal area is unpolluted (PLI<1). Therefore, this study revealed that, the main contributor of heavy metals in this area is Pb while the sediment quality of Kuala Perlis was in minor pollution condition.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.