| Issue |
E3S Web of Conf.
Volume 36, 2018
BIG 2018 – 4th Nationwide Scientific Conference on Engineering-Infrastructure-Mining
|
|
|---|---|---|
| Article Number | 02009 | |
| Number of page(s) | 7 | |
| Section | Measurements | |
| DOI | https://doi.org/10.1051/e3sconf/20183602009 | |
| Published online | 09 April 2018 | |
Assessment of deformations in mining areas using the Riegl VZ-400 terrestrial laser scanner
Cracow University of Technology, Faculty of Civil Engineering, Krakow, Poland
* Corresponding author: dszwarkowski@pk.edu.pl
The article discusses the use of terrestrial laser scanning to assess deformations in mining areas. Using the terrestrial laser scanning Riegl VZ-400, control measurements within the historical location of the underground coal mine in Zabrze were made. Two laser scanning measurements were taken over the course of one year. The research made it possible to determine changes in surface deformation on the shallowly located mining excavations. Differences in the terrain may be due to subsidence associated with the influence of underground mining and pose a threat to the adjacent road infrastructure and structures.
Key words: terrestrial laser scanning / ground deformation / USBC
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.