| Issue |
E3S Web Conf.
Volume 38, 2018
2018 4th International Conference on Energy Materials and Environment Engineering (ICEMEE 2018)
|
|
|---|---|---|
| Article Number | 03026 | |
| Number of page(s) | 5 | |
| Section | Water Conservancy and Civil Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/20183803026 | |
| Published online | 04 June 2018 | |
Using BIM Technology to Optimize the Traditional Interior Design Work Mode
Beijing University of Civil Engineering and Architecture, Beijing, 100044, China
* Corresponding author: zhuningke@bucea.edu.cn
the development of BIM technology and application in the field of architecture design has produced results, but BIM technology and application in the field of interior design is still immaturity because of construction and decoration engineering separation. The article analyzes the problems that BIM technology lead to the interior design work mode optimization, from the 3D visualization work environment, real-time collaborative design mode, physical analysis design mode, information integration design mode state the application in interior design.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.