Issue |
E3S Web Conf.
Volume 41, 2018
IIIrd International Innovative Mining Symposium
|
|
---|---|---|
Article Number | 01029 | |
Number of page(s) | 5 | |
Section | Environment Saving Mining Technologies | |
DOI | https://doi.org/10.1051/e3sconf/20184101029 | |
Published online | 26 June 2018 |
Seismological Survey of the Coal Fields Based on the Applying of the Low-Power Sources of Oscillation
1
Institute of Coal, Federal Research Center of Coal and Coal Chemistry SB RAS,
650065 Kemerovo,
10 Leningradsky ave.,
Russian Federation
2
T.F. Gorbachev Kuzbass State Technical University, Underground Mining Department,
650000 Kemerovo,
28 Vesennya st.,
Russian Federation
* Corresponding author: tailakov@uglemetan.ru
the application of seismoacoustic profiling by the method of a common depth point (CDP) to clarify the geological conditions of the coal fields, to determine the location and extent of the existing faults is considered. The results of measurements made in the Kuznetsk Coal Basin (Kuzbass) on the basis of the use of longitudinal and shear elastic waves generated by a source of low power oscillations are presented. The field measurements have been made on the two surface geophysical profiles with the total length of 1048 m. The proposed approach allowed reaching the depth of the transverse waves distribution at the level of 300 meters and can be effectively used as complementary to other studies in determining the filtration properties and permeability of coal seams with the aim of developing measures for their degassing and subsequent utilization of coalmine methane.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.