E3S Web Conf.
Volume 41, 2018IIIrd International Innovative Mining Symposium
|Number of page(s)||6|
|Section||Environment Problems in Mining Regions|
|Published online||26 June 2018|
Disposal of Mining Waste: Classification and International Recycling Experience
Lebanese International University,
2 University of Antwerp, 2000 Prinsstraat 13, Antwerpe, Belgium
3 T.F. Gorbachev Kuzbass State Technical University, Surveying and Geology Department, 650000 Vesennya st. 28, Kemerovo, Russian Federation
* Corresponding author: firstname.lastname@example.org
The main directions of mining and industrial wastes’ utilization are the production of building materials, their use in the construction industry without additional processing, and also the production of metals from metal-containing raw materials. It should be noted that current waste is preferable for the production of building materials, since they preserve the primary physical and mechanical properties and chemical composition and, moreover, can reach the consumer bypassing all other steps that are mandatory for waste consolidated (transportation, storage, etc.). For the production of building materials, not less than 30% of overburden and refinement tailings are suitable, almost all metallurgical and fuel slags, waste products of fertilizers and building materials. Even larger amounts of waste can be used for various laying and burial works (construction of road bases and dams, filling of worked out areas, leveling of the relief).
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.