Issue |
E3S Web Conf.
Volume 41, 2018
IIIrd International Innovative Mining Symposium
|
|
---|---|---|
Article Number | 03001 | |
Number of page(s) | 6 | |
Section | Innovations in Mining Machinery | |
DOI | https://doi.org/10.1051/e3sconf/20184103001 | |
Published online | 26 June 2018 |
Optimization of Driving Trailers Transmission for Peat Transportation
Tver State Technical University (TvSTU),
170026,
Afanasiy Nikitin emb., 22,
Tver,
Russia
* Corresponding author: alvovich@mail.ru
Improving the performance of transport tractor units in operations for removing peat from production areas is associated with increased body trailers that require the use of drive type trailers with active front wheels. When designing such trailers there were difficulties in determining the transmission ratio and transmission scheme, especially in the case of using tractors with different passport interpretations of a synchronous operating mode with the power take-off shaft (PTS). The article presents the method of calculating the transmission ratio of the drive type trailers depending on the parameters of a synchronous operating mode the power take-off shaft of the tractor. The principle kinematic scheme of driving trailers is justified. Recommendations on selection of transmission units are given.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.