E3S Web Conf.
Volume 41, 2018IIIrd International Innovative Mining Symposium
|Number of page(s)||5|
|Section||Innovations in Mining Machinery|
|Published online||26 June 2018|
Harmonized European Standards for Proof of Competence of Cranes
Technische Hochschule Georg Agricola (THGA),
2 T.F. Gorbachev Kuzbass State Technical University, 650000, 28 Vesennyaya St., Kemerovo, Russia
* Corresponding author : firstname.lastname@example.org
With EN 13001-1 ff. a harmonized set of standards for safety of cranes was and is established. Due to harmonization the use of the standards leads to the assumption of conformity with the safety requirements of the machinery directive. A major argument for the application of the standards. The standards comprise new concepts of proof of competence in comparison to previous standards. Keywords of these new concepts are “Classification”, “Limit state method”, “Mass Distribution Class” and “Partial safety factors”. The article gives an overview to EN 13001-1, EN 13001-2 and EN 13001-3-1. This is the set of standards for proof of the structural parts of a crane. The main aspects of the standards are shown and discussed with regard to their impact on calculation.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.