| Issue |
E3S Web Conf.
Volume 42, 2018
ASTECHNOVA 2016 International Energy Conference
|
|
|---|---|---|
| Article Number | 01008 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/20184201008 | |
| Published online | 29 June 2018 | |
Design of Hydro Power by Using Turbines Kaplan on The Discharge Channel Paiton 1 and 2
1
Engineering Physics Dept. Institut Teknologi Sepuluh Nopember, Surabaya,
Indonesia
Condenser water from the discharge channel PJB Paiton discharged to the sea has the potential mechanical energy, because the flow rate of 7.6 m3 / s (if both discharge PJB Paiton function) and the discharge channel reaches a height of 4m. This paper will describe the design of hydro power (in the form of a block diagram) by using Kaplan turbine driven by utilizing the wastewater condenser. Kaplan turbine performance represented in the form of the relationship between the incoming water flow and the pitch angle (the angle between the propellers with a hub) to the torque generated. The simulation results indicate that the turbine torque is proportional to the mechanical power turbine. The greater the torque, the greater the mechanical power, and vice versa.
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.