| Issue |
E3S Web Conf.
Volume 44, 2018
10th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|
|
|---|---|---|
| Article Number | 00036 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/20184400036 | |
| Published online | 03 July 2018 | |
Selecting of heating by gas radiant heaters in relation to the new ecodesign requirements on the example of large–cubage halls
Wroclaw University of Science and Technology, Faculty of Environmental Engineering, Wybrzeże Wyspiańskiego 27, 50–370 Wroclaw, Poland
* Corresponding author : edyta.dudkiewicz@pwr.edu.pl
According to the schedule of the European Commission’s product efficiency policy in force, as specified in European Union Commission Regulation of 28 April 2015, new requirements for local space heaters are in effect from 1 January 2018. The paper provides current definitions of appliances, including gas radiant heaters, intended for commercial applications. The requirements resulting from current regulations and respective changes substantial for manufacturers and investors are presented. Gas consumption cost calculations and accumulated cost analysis for 10–year period for two types of heaters, those of the lowest and the highest value of seasonal space heating energy efficiency, are exhibited. This is a reliable parameter essential for selecting the appliance, and its value is calculated and presented according to new regulations.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.